Home           Contact us           FAQs           
 
   Journal Page   |   Aims & Scope   |   Author Guideline   |   Editorial Board   |   Search
    Abstract
2012 (Vol. 4, Issue: 06)
Article Information:

Comparative Study of FAWAG and SWAG as an Effective EOR Technique for a Malaysian Field

Saleem Qadir Tunio, Tariq Ali Chandio and Muhammad Khan Memon
Corresponding Author:  Saleem Qadir Tunio 

Key words:  Comparison, EOR, FAWAG, SWAG and oil recovery, , ,
Vol. 4 , (06): 645-648
Submitted Accepted Published
2011 November, 03 2011 December, 09 2012 March, 15
Abstract:

At present, petroleum engineering has become economics based field hence all efforts are taken to make sure that we squeeze out the last drop of oil from the reservoir. Field A, one of Malaysian oil field is a strong candidate for Enhanced Oil Recovery (EOR) which was producing for more than 15 years. Currently Simultaneous Water Alternating Gas (SWAG) along with other techniques tends to improve oil recovery by improving reservoir fluids mobility and providing driving force. Foam can also be added in water alternating gas technique to improve the sweeping mechanism and cut off the gas production which is termed as Foam Assisted Water-Alternating Gas (FAWAG). In this study, a comparison has been made between FAWAG and SWAG in order to come up with the effective method of EOR for a better oil recovery. Core flood experiments have been carried out for evaluating both techniques. Mathematical modeling of FAWAG and SWAG are not included in this comparative study. Experimental results shows that, SWAG tends to address all recovery related problems economically where as foam has been seen to address the problems by assisting other Enhanced Oil Recovery Techniques and proved that foam assistance has given better recovery.
Abstract PDF HTML
  Cite this Reference:
Saleem Qadir Tunio, Tariq Ali Chandio and Muhammad Khan Memon, 2012. Comparative Study of FAWAG and SWAG as an Effective EOR Technique for a Malaysian Field.  Research Journal of Applied Sciences, Engineering and Technology, 4(06): 645-648.
    Advertise with us
 
ISSN (Online):  2040-7467
ISSN (Print):   2040-7459
Submit Manuscript
   Current Information
   Sales & Services
   Contact Information
  Executive Managing Editor
  Email: admin@maxwellsci.com
  Publishing Editor
  Email: support@maxwellsci.com
  Account Manager
  Email: faisalm@maxwellsci.com
  Journal Editor
  Email: admin@maxwellsci.com
  Press Department
  Email: press@maxwellsci.com
Home  |  Contact us  |  About us  |  Privacy Policy
Copyright © 2009. MAXWELL Science Publication, a division of MAXWELLl Scientific Organization. All rights reserved