Home            Contact us            FAQs
    
      Journal Home      |      Aim & Scope     |     Author(s) Information      |      Editorial Board      |      MSP Download Statistics

     Research Journal of Applied Sciences, Engineering and Technology

    Abstract
2013(Vol.5, Issue:15)
Article Information:

Study on Semi-Gasification Combustion Technology of Stover

Zhao Qing-Ling, Chen Fu-Jin, Wang Yang-Yang and Zhang Bai-Liang
Corresponding Author:  Zhao Qing-Ling 
Submitted: July 21, 2012
Accepted: October 09, 2012
Published: April 25, 2013
Abstract:
In order to develop a mechanism of clean and efficient combustion, this study studied the combustion mechanism of stover semi-gasification by a clean stove designed. The experimental material was corn Stover briquettes. Process of semi-gasification combustion can be divided into two parts: gasification stage and combustion stage. First, under the low primary air amount, stover gives off partly combustible gas (Volatile matter). Then, the combustible gas rises and burns in the upper Furnace when it meets higher secondary air amount. At the same time, the residue remained in bottom Furnace keeps on gasifying and burning under high temperature until the fuel is exhausted. In the process, two phases (solid and gas) combustion becomes into one phase (gas) combustion. Due to inadequate primary air and low temperature of semi-gasification chamber (550-750℃), all the ash was loose and no slag was found. Moreover, combustible gas produced was directly completely burned off and no tar appeared in the emissions. According to the result, the combustion thermal efficiency of clean stove (75%) is up to 75% and higher than primary stove (below 12%).

Key words:  Clean stove, efficiency, emissions, semi-gasification, , ,
Abstract PDF HTML
Cite this Reference:
Zhao Qing-Ling, Chen Fu-Jin, Wang Yang-Yang and Zhang Bai-Liang, . Study on Semi-Gasification Combustion Technology of Stover. Research Journal of Applied Sciences, Engineering and Technology, (15): 3912-3915.
ISSN (Online):  2040-7467
ISSN (Print):   2040-7459
Submit Manuscript
   Information
   Sales & Services
Home   |  Contact us   |  About us   |  Privacy Policy
Copyright © 2024. MAXWELL Scientific Publication Corp., All rights reserved