Home           Contact us           FAQs           
     Journal Home     |     Aim & Scope    |    Author(s) Information      |     Editorial Board     |     MSP Download Statistics
2013 (Vol. 5, Issue: 17)
Article Information:

Study on the Engine Electronic Ignition System Based on SCM and LabVIEW

Shanzhen Xu, Cheng Wang and Xuxu Dong
Corresponding Author:  Shanzhen XU 

Key words:  Correction references, data communication electronic ignition system, host computer, host computer, , ,
Vol. 5 , (17): 4321-4328
Submitted Accepted Published
July 31, 2012 September 17, 2012 May 01, 2013

To improve the operating performance of the electronic control ignition system and meet the requirement of the experiment teaching, an electronic control ignition system based on Lab VIEW and micro-controller was developed in this study. The system was composed of the ignition control circuit, signal processing circuits of various sensors and system software, which combined the functions of data acquisition, analysis and control. According to the working principle of the ignition system and working parameters, the cylinder block temperature signal, throttle position signal and power supply voltage signal were used as the correction references for the ignition advance angle. So the processing circuits of the sensors were designed based on the selection of the sensors and analysis their working principle or characteristic. The software of the host computer was visual and easy to control the slave computer, which realized the control for the ignition timing and dwell time. The experiment results indicated that the system developed in this study was reliable and that the data communication between the host computer and the slave computer reached the expected requirement. The research results provided a foundation for the further study and performance optimization.
Abstract PDF HTML
  Cite this Reference:
Shanzhen Xu, Cheng Wang and Xuxu Dong, 2013. Study on the Engine Electronic Ignition System Based on SCM and LabVIEW.  Research Journal of Applied Sciences, Engineering and Technology, 5(17): 4321-4328.
    Advertise with us
ISSN (Online):  2040-7467
ISSN (Print):   2040-7459
Submit Manuscript
   Current Information
   Sales & Services
Home  |  Contact us  |  About us  |  Privacy Policy
Copyright © 2015. MAXWELL Scientific Publication Corp., All rights reserved