|
Abstract
|
Article Information:
Research on Flat Panel Ultrovilet Lamps
Jian Li and Kun Wang
Corresponding Author: Kun Wang
Submitted: October 08, 2012
Accepted: December 03, 2012
Published: May 20, 2013 |
Abstract:
|
Flat panel ultraviolet Lamps were made of ITO glass and bonded aluminum with porous anodic alumina on the surface. The mixture of argon and nitrogen is introduced as the working gas. The UV radiation power density is tested at different optimization conditions. The results show that the lamp with about 20 W/m2 UV radiation can be obtained when the lamp with 3 mm thick glass and 0.7 mm gas gap distance work at 5% nitrogen and 95% argon at 250 torr. The influence factors are investigated and discussed.
Key words: Electron temperature, vacuum ultraviolet radition, ultroviolet lamps, , , ,
|
|
Abstract
|
PDF
|
HTML |
|
Cite this Reference:
Jian Li and Kun Wang, . Research on Flat Panel Ultrovilet Lamps. Research Journal of Applied Sciences, Engineering and Technology, (21): 5064-5069.
|
|
|
|
 |
ISSN (Online): 2040-7467
ISSN (Print): 2040-7459 |
 |
| Information |
|
|
|
|
| Sales & Services |
|
|
|
|
