Home           Contact us           FAQs           
     Journal Home     |     Aim & Scope    |    Author(s) Information      |     Editorial Board     |     MSP Download Statistics
2013 (Vol. 5, Issue: 24)
Article Information:

Preparation and Numerical Simulation of Ni-SiC Composite Coatings Deposited by Electrode Position

Yong Wang and Huibin Xu
Corresponding Author:  Yong Wang 

Key words:  Electrode position, Ni-SiC, numerical simulation, preparation, , ,
Vol. 5 , (24): 5602-5607
Submitted Accepted Published
October 17, 2012 December 19, 2012 May 30, 2013

In order to investigate and predict effects of preparation parameters on wear mass loss of Ni-SiC composite coatings, Ni coatings and Ni-SiC composite coatings were prepared on steel substrates by electrodeposition process. The results showed that the contents of SiC particles increased with density of pulse current and on-duty ratio of pulse current increasing. The predictive curves of wear mass losses predicted by ANN had the similar shapes with the measured curve and the maximum error was 9.7%. When the current density was between 30 A/dm2 and 50 A/dm2, the wear losses of Ni coatings and Ni-SiC coatings decreased with the increase of current density. SiC particles in a composite coating electrodeposited by ultrasonic parameters were much greater in number and were dispersed homogeneously in the deposit and the Ni-SiC composite coating exhibited a dense structure.
Abstract PDF HTML
  Cite this Reference:
Yong Wang and Huibin Xu, 2013. Preparation and Numerical Simulation of Ni-SiC Composite Coatings Deposited by Electrode Position.  Research Journal of Applied Sciences, Engineering and Technology, 5(24): 5602-5607.
    Advertise with us
ISSN (Online):  2040-7467
ISSN (Print):   2040-7459
Submit Manuscript
   Current Information
   Sales & Services
Home  |  Contact us  |  About us  |  Privacy Policy
Copyright © 2015. MAXWELL Scientific Publication Corp., All rights reserved