Home            Contact us            FAQs
    
      Journal Home      |      Aim & Scope     |     Author(s) Information      |      Editorial Board      |      MSP Download Statistics

     Research Journal of Applied Sciences, Engineering and Technology

    Abstract
2013(Vol.6, Issue:22)
Article Information:

Research on Energy-saving Technology of Crank Balanced Pumping Unit

Feng Ziming, Zhang Jindong, Gu Huibin and Luan Yunwei
Corresponding Author:  Feng Ziming 
Submitted: January 12, 2013
Accepted: February 18, 2013
Published: December 05, 2013
Abstract:
In order to saving energy and emission reduction, a secondary balance technology was used to reform the conventional beam pumping unit. The output torque from the reduction gearbox of conventional beam pumping units is usually characterized by its periodic drastic changes. Based on the idea of "cutting peak and filling valley" and the theory of the Fourier series expansion for torque curve, the second balance device is designed in order to slow down the fluctuations in the torque curve. The second balance device, with the similar balance principle to the crank balance, is connected to the output shaft of the reduction gearbox and can further reduce torque fluctuation rate and peak torque. Field test result of the secondary balance device shows that the Root-Mean-Square (RMS) torque is decreased by 22.7% and the energy-saving rate of motor reaches 6.54%.

Key words:  Beam pumping unit, fourier series, net torque of gearbox, secondary balance, , ,
Abstract PDF HTML
Cite this Reference:
Feng Ziming, Zhang Jindong, Gu Huibin and Luan Yunwei, . Research on Energy-saving Technology of Crank Balanced Pumping Unit. Research Journal of Applied Sciences, Engineering and Technology, (22): 4152-4157.
ISSN (Online):  2040-7467
ISSN (Print):   2040-7459
Submit Manuscript
   Information
   Sales & Services
Home   |  Contact us   |  About us   |  Privacy Policy
Copyright © 2024. MAXWELL Scientific Publication Corp., All rights reserved