Home            Contact us            FAQs
    
      Journal Home      |      Aim & Scope     |     Author(s) Information      |      Editorial Board      |      MSP Download Statistics

     Research Journal of Applied Sciences, Engineering and Technology

    Abstract
2014(Vol.7, Issue:12)
Article Information:

Compressive Strength and Microstructure of Sugar Cane Bagasse Ash Concrete

Asma Abd Elhameed Hussein, Nasir Shafiq, Muhd Fadhil Nuruddin and Fareed Ahmed Memon
Corresponding Author:  Asma Abd Elhameed Hussein 
Submitted: August 30, 2013
Accepted: September 16, 2013
Published: March 29, 2014
Abstract:
This study presents the results of an experimental research study on the effectiveness of Sugar Cane Bagasse Ash (SCBA) as a cement replacement material in concrete production. The ordinary Portland cement was replaced with 0, 5, 10, 15, 20, 25 and 30%, respectively bagasse ash, the effect of Sugar cane Bagasse Ash on workability, compressive strength and microstructure of Interfacial Transition Zone (ITZ) of concrete was examined. The results showed that inclusion of Sugar cane Bagasse Ash in concrete up to 20% level significantly enhanced the compressive strength of concrete at all ages; the highest compressive strength was obtained at 5% SCBA replacement level. The ITZ thickness was greatly reduced with increasing the bagasse ash replacement level up to 15%, beyond that the ITZ thickness was slightly increased, however the thickness was still narrower than the normal concrete, it was observed that at 15% bagasse ash replacement level, the interfacial transition zone was homogeneous and there was no gap between the coarse aggregate and the paste matrix.

Key words:  Compressive strength, interfacial transition zone, microstructure, sugar cane bagasse ash, workability, ,
Abstract PDF HTML
Cite this Reference:
Asma Abd Elhameed Hussein, Nasir Shafiq, Muhd Fadhil Nuruddin and Fareed Ahmed Memon, . Compressive Strength and Microstructure of Sugar Cane Bagasse Ash Concrete. Research Journal of Applied Sciences, Engineering and Technology, (12): 2569-2577.
ISSN (Online):  2040-7467
ISSN (Print):   2040-7459
Submit Manuscript
   Information
   Sales & Services
Home   |  Contact us   |  About us   |  Privacy Policy
Copyright © 2024. MAXWELL Scientific Publication Corp., All rights reserved