Abstract

Membrane technology effectively separates CO2 from CH4 and has been practiced for many years but requires membranes with high selectivity and permeability. Different approaches are employed to improve membrane performance and it is soon possible to develop a blended polymeric membrane that separates high pressure gas streams at the point of processing pressure. However, glassy polymers suffer a lack of permeability causing their performance to drop as an upper bound trade-off but highly selective and rubbery polymers have high permeability with low selectivity. As an amine solution is capable of purifying naturally acidic gas, blending glassy, rubbery polymers with amines-specifically, polysulfone and polyvinyl acetate with diethanol amine in dimethyl acetamide as solvent-we developed flat sheet membranes with desirable properties. As it is now possible to acquire amine-polymer blends with more desirable properties by mixing with a miscible polymer, it is essential to observe factors that affect the polymer's miscibility with amines. Hence, we also analyzed the effects of blend ratios on different properties. Blended membranes of different ratios were synthesized and their functional groups were characterized by Fourier Transformed Infra-Red spectroscopy (FTIR). We then employed Thermal Gravimetric Analysis (TGA) to describe weight loss and Field Emission Scanning Electron Microscopy (FESEM) to determine respective morphologies.

Keywords:

Blending, diethanol amine , dimethylacetamide , polysulfone , polyvinyl acetate,

References

1. Acharya, N.K., V. Kulshresthaa, K. Awasthia, A.K. Jaina, M. Singha and Y.K. Vijay, 2008. Hydrogen separation in doped and blend polymer membranes. Int. J. Hydrogen Energ., 33: 327-331.
   CrossRef    
2. Ahmed, I., A. Idris, M.Y. Noordin and R. Rajput, 2011. High performance ultrafiltration membranes prepared by the application of modified microwave irradiation technique. Ind. Eng. Chem. Res., 50(4): 2272-2283.
   CrossRef    
3. Aroonwilas, A. and A. Veawab, 2004. Characterization and comparison of the CO2 absorption performance into single and blended alkanolamines in a packed column. Ind. Eng. Chem. Res., 43: 2228-2237.
   CrossRef    
4. Baker, R.W., 2004. Membrane Technology and Application. 2nd Edn., John Wiley and Sons, Ltd., Chichester.
   CrossRef    
5. Bara, J.E., S. Lessmann, C.J. Gabriel, E.S. Hatakeyama, R.D. Noble and D.L. Gin, 2007. Synthesis and performance of polymerizable room-temperature ionic liquids as gas separation membranes. Ind. Eng. Chem. Res., 46(16): 5397-5404.
   CrossRef    
6. Bishnoi, S. and G.T. Rochelle, 2002. Absorption of carbon dioxide in aqueous piperazine/ methyldiethanolamine. AlChE J., 48: 2788-2799.
   CrossRef    
7. Cheng, H.H. and C.S. Tan, 2009. Carbon dioxide capture by blended alkanolamines in rotating packed bed. Energ. Procedia, 1: 925-932.
   CrossRef    
8. Chiesa, P. and S.P. Consonni, 1999. Shift reactors and physical absorption for low-CO2 emission IGCCs. J. Eng. Gas Turb. Power, 121: 295-305.
   CrossRef    
9. Chung, T.S., L.Y. Jiang, Y. Li. and S. Kulprathipanja, 2007. Mixed Matrix Membranes (MMMs) comprising organic polymers with dispersed inorganic filler for gas separation. Prog. Polym. Sci., 32: 483-507.
   CrossRef    
10. Ghosh, A. and S. Banerjee, 2008. Thermal, mechanical and dielectric properties of novel fluorinated copoly(imide siloxane)s. J. Appl. Polym. Sci., 109(4): 2329-2340.
    CrossRef    
11. Harlick, P.J.E. and F.H. Tezel, 2004. An experimental adsorbent screening study for CO2 capture from N2. Micropor. Mesopor. Mat., 76: 71-79.
    CrossRef    
12. Hosseini, S.S., M.M. Teoh and T.S. Chung, 2008. Hydrogen separation and purification in membranes of miscible polymer blends with interpenetration networks. Polymer, 49: 1594-1603.
    CrossRef    
13. Houde, A.Y., S.S. Kulkerni and M.G. Kulkerni, 2012. Permeation and plasticization behavior of glassy polymers: A WAXD interpretation. J. Membrane Sci., 71(1-2): 117-128.
    CrossRef    
14. Hussain, S., 2006. Mixed matrix dual layer hallow fiber membrane for natural gas separation. Ph.D. Thesis, School of Chemical and Bio Molecular Engineering, Gorgia Institute of Technology.
    
15. Ismail, A.F. and L.I.B. David, 2001. A review on the latest development of carbon membranes for gas separation. J. Membrane Sci., 193: 1-18.
    CrossRef    
16. Jensen, K.A., B.M. Dahl, Niclson and G. Bosch, 1972. Acta Chem, Scand, 26: 2241.
    CrossRef    
17. Kerry, F.G., 2007. Industrial Gas Handbook: Gas Separation and Purification. CRC, New York, ISBN 978-0- 8493-9005-0.
    CrossRef    
18. Khan, A.L., X.F. Li and I.F.J. Vankelecom, 2011. SPEEK/Matrimid blend membranes for CO2 separation. J. Membrane Sci., 380: 55-62.
    CrossRef    
19. Littel, R.J., W.P.M. van Swaaij and G.F. Versteeg, 1990. Kinetics of carbon dioxide with tertiary amines in aqueous solution. AIChE J., 36: 1633-1640.
    CrossRef    
20. Mehdipour-Ataei, S. and A. Amirshaghaghi, 2005. Novel thermally stable poly(ether imide ester)s from 2,6-bis (4-aminophenoxy) pyridine. J. Appl. Polym. Sci., 96(2): 570-576.
    CrossRef    
21. Moore, T.T., 2004. Effect of materials, processing and operating conditions on the morphology and gas transport properties of mixed matrix membranes. Ph.D. Thesis, University of Texas at Austin.
    
22. Mushtaq, A., H.B. Mukhtar, A.M. Shariff and H.A. Mannan, 2013. Development of polymeric blend membrane for removal of CO2 from natural gas. Int. J. Eng. Technol. (IJET-IJENS), 13: 53-60.
    
23. Oral, C.A., R.D. Noble and S.B. Tantekin-Ersolmaz, 2011. Ternary mixed-matrix membranes containing room temperature ionic liquids. Proceeding of the North American Membrane Society Conference (NAMS '11), 2011.
    
24. Powell, C.E. and G.G. Qiao, 2006. Polymeric CO2/N2 gas separation membranes for the capture carbon dioxide from power plant flue gases. J. Membrane Sci., 279: 1-49.
    CrossRef    
25. Rafiq, S., Z. Man, S. Maitra, N. Muhammad and F. Ahmad, 2012. Kinetics of thermal degradation of polysulfone/polyimide blended polymeric membranes. J. Appl. Polym. Sci., 123(6): 3755-3763.
    CrossRef    
26. Rochelle, G.T., 2009. Amine scrubbing for CO2 capture. Science, 325: 1652-1654.
    CrossRef    PMid:19779188    
27. Sanders, E.S., 1988. Penetrant-induced plasticization and gas permeation in glassy polymers. J. Membrane Sci., 37: 63-80.
    CrossRef    
28. Semsarzadeh, M.A. and B. Ghalei, 2012. Characterization and gas permeability of polyurethane and polyvinyl acetate blend membranes with polyethylene oxide-polypropylene oxide block copolymer. J. Membrane Sci., 401-402: 97-108.
    CrossRef    
29. Siesler, H.W. and K. Holland-Moritz, 1980. Infrared and Raman Spectroscopy of Polymers. Marcel Dekker, Inc., New York.
    
30. Tang, J., W. Sun, H. Tang, M. Radosz and Y. Shen, 2005. Enhanced CO2 absorption of poly(ionic liquid)s. Macromolecules, 38(6): 2037-2039.
    CrossRef    
31. Vu, D.Q., W.J. Koros and S.J. Miller, 2003. Mixed matrix membranes usind carbon molecular sieves: I. Preparation and experimental results. J. Membrane Sci., 211: 311.
    CrossRef    
32. Wee, S.L., C.T. Tye and S. Bhatia, 2008. Membrane separation process-pervaporation through zeolite membrane. Sep. Purif. Technol., 63: 500-516.
    CrossRef    
33. Wind, J.D., D.R. Paul and W.J. Koros, 2004. Natural gas permeation in polyimide membranes. J. Membrane. Sci., 228: 227-236.
    CrossRef    
34. Zhang, J., J. Lu, W. Liu and Q. Xue, 1999. Separation of CO2 and CH4 through two types of polyimide membrane. Thin Solid Films, 340: 106-109.
    CrossRef    

Competing interests

The authors have no competing interests.

Open Access Policy

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Copyright

The authors have no competing interests.