Abstract

Aim of study a novel design of an Advanced Reduced instruction set computing Machine (ARM) system is proposed by means of embedded TCP/IP boards and using internet as the communication network between the systems. A new methodology of data acquisition and control based on embedded ARM platform is researched and developed here. This platform concentrates on the industrial safety by using ASP.NET. The proposed system reduces the data transfer time by efficiently collecting real-time data through the router and enables high security by user authentication. This system with ARM processor achieves impressive response and high speed data acquisition compared to the conventional approaches done using other processor. Further poor security system design and delay in data acquisitation faced in conventional methods have been eliminated and improved version with better reliability is achieved. This solution can be applied for upgrading the existing industries.

Keywords:

Acquisition system, automatic collection, data acquisition, data logger, device management, industrial monitoring, protocol stacks,

References

1. Ali Ziya, A. and A.K. Mehmet, 2009. An internet-based interactive embedded data-acquisition system for real-time applicatios. IEEE T. Instrum. Meas., 58(3).
   
2. ARM Ltd., 2007. Procedure Call Standard for the ARM Architecture. ARM Ltd., Cambridge, UK.
   
3. Bogdan, C., B. Loredana and T. Adrian, 2010. The management of wireless real-time data acquisition processes using virtual instruments. Proceeding of the International Conference on Automation, Quality and Testing, Robotics, 3: 1-6.
   
4. Chen, L., 2009. Research on voltage acquisition system based on modbus industrial bus and single chip. Proceeding of the International Conference on Signal Processing Systems. Singapore, pp: 585-588.
   
5. Chen, R., Z.X. He, J. Qiu and L. He, 2010. Distributed data acquisition unit based on GPS and ZigBee for electromagnetic exploration. Proceeding of the Instrumentation and Measurement Technology Conference (I2MTC). Austin, TX, pp: 981-985.
   CrossRef    
6. Daogang, P., Z. Hao, W. Jiannian, L. Hui and X. Fei, 2010. Research and design of embedded data acquisition and monitoring system based on power PC and CAN bus. Proceeding of the 8th World Congress on Intelligent Control and Automation.
   
7. Fabiano, S., M. de Campos, P.S. Sausen, R.F. de Camargo, C. Gehrke, C. Rech, M.A. Spohn and A.C. Oliveira, 2009. Monitoring in industrial systems using wireless sensor network with dynamic power management. IEEE T. Instrum. Meas., 58(9).
   
8. Kai, Z., D. Peng, H. Zhang, H. Li and F. Xia, 2009. Research and development of the remote I/O data acquisition system based on embedded ARM platform. Proceeding of the International Conference on Electronic Computer Technology.
   
9. Khusvinder, G., Y. Shuang-Hua, Y. Fang and L. Xin, 2009. A ZigBee-based home automation system. IEEE T. Consum. Electr., 55(2).
   
10. Krisada, V., V.I. Nguyen and W. Benjapolakul, 2007. A high-speed, low-cost and secure implementation based on embedded ethernet and internet for SCADA systems. Proceeding of the SICE Annual Conference, pp: 1692-1699.
    
11. Li, S., R.L. Jiarong, C.W. Yichun, M.L. Guiming, W. Feng and W. Yong, 2010. Continuous and real-time data acquisition embedded system for East. IEEE T. Nucl. Sci., 57(2).
    
12. Lucia, C.P., L. David, F. Jose and J.R.A. Juan, 2008. Optimization of an industrial sensor and data acquisition laboratorythrough time sharing and remote access. IEEE T. Ind. Electron., 55(6).
    
13. Meijuan, G., Z. Fan and T. Jingwen, 2008. Design and implementation of wireless sensor network data collection terminal based on ARM9. Proceeding of the ISECS International Colloquium on Computing, Communication, Control and Management (CCCM'08). Guangzhou, 2: 587-590.
    
14. Qishen, Z., Z. Dongmei and S. Xunwen, 2010. Distributed remote temperature monitoring and acquisition system based on CAN bus. Proceeding of the Prognostics and System Health Management Conference (PHM, 2010). Macao, pp: 1-4.
    
15. Sun, R. and T. Yi, 2009. Design and implementation of industrial multi-parameter data acquisition system based on AT89S52. Proceeding of the 3rd International Symposium on Intelligent Information Technology Application Workshops.
    
16. Sun, H. and X. Peng and F. Huang, 2009a. Bluetooth data acquisition system based on ARM. Proceeding of the 1st International Workshop on Education Technology and Computer Science (ETCS'09). Wuhan, Hubei, 1: 872-875.
    PMCid:PMC2825757    
17. Sun, R., Y. Tian and Y. Dong, 2009b. Design and implementation of industrial multi-parameter data acquisition system based on AT89S52. Proceeding of the 3rd International Symposium on Intelligent Information Technology Application Workshops (IITAW'09). Nanchang, pp: 169-172.
    
18. Zhao, X.J., H.X. Su, M.W. Ren, Y. Cao, L. Chen and F. Wang, 2009. Remote equipment monitoring system based on ARM9 and CAN bus. Proceeding of the WRI Global Congress on Intelligent Systems, pp: 298-302.
    CrossRef    PMCid:PMC2830841    

Competing interests

The authors have no competing interests.

Open Access Policy

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Copyright

The authors have no competing interests.