|
Abstract
|
Article Information:
Modelling of Closed Loop Class E Inverter Based Induction Heater
S. Arumugam and S. Ramareddy
Corresponding Author: S. Arumugam
Submitted: 2010 September, 08
Accepted: 2010 December, 02
Published: 2011 January, 20 |
Abstract:
|
This study presents simulation of class E inverter based induction heater system using simulink. DC
is converted into high frequency AC using class E inverter. This high frequency AC is used for induction
heating. Closed loop systems are modeled and they are simulated using Mat lab Simulink.The results of closed
loop systems are presented. The proposed amplifier with two series-parallel resonant load networks will allow
sinusoidal output voltage to be achieved by associating with the positive and negative quasi-sinusoidal
waveforms. The complementarily activated configuration will provide continuous high-ripple-frequency inputcurrent
waveforms; this approach significantly reduces electromagnetic interference and requires very little
filtering. With the symmetry of the push-pull Class-E Circuit, there is the additional benefit that the even
harmonics are suppressed at the load, and thus there are fewer harmonic distortions.
Key words: Harmonic Distortion (HD), Induction Heating (IH), Power Amplifier (PA), Zero-voltage Switching (ZVS), , ,
|
|
Abstract
|
PDF
|
HTML |
|
Cite this Reference:
S. Arumugam and S. Ramareddy, . Modelling of Closed Loop Class E Inverter Based Induction Heater. Research Journal of Applied Sciences, Engineering and Technology, (01): 15-21.
|
|
|
|
 |
ISSN (Online): 2040-7467
ISSN (Print): 2040-7459 |
 |
| Information |
|
|
|
|
| Sales & Services |
|
|
|
|
