Abstract
|
Article Information:
Analysis of Cooking Utensils Containing Aluminium Scrap in Senegal
Mamadou Babacar Ndiaye, Sandrine Bec, Bernard Coquillet and Ibrahima Khalil Cissé
Corresponding Author: Mamadou Babacar Ndiaye
Submitted: 2011 September, 25
Accepted: 2011 November, 04
Published: 2012 February, 15 |
Abstract:
|
The purpose of this study is to analyze the metallurgical quality cooking utensils containing
aluminum scrap in Senegal. Indeed, in this country, the recycling of metallic materials is a very interesting
income generating activity. A whole chain, from collection to revaluation, has been set up and operate this vein
with the support of partners, for the most foreigners. For aluminum scrap mostly issued from the automotive
industry, they are essentially recycled in cooking utensils by the technique of molding sand. A study was then
proposed to analyze the reconstituted aluminum alloy, the artisan technique and the quality of final products.
This first part focuses on the quality of alloys and their mechanical properties. The results show that all the
alloys have levels higher than the maximum allowed by the standard NF EN 601 (July 2004). They also proven
that the finished products have a high porosity due to the low amount of water control and linked to the quality
of sand. That’s why our analysis allowed to propose a change in preventive than half of the sand every three
(03) months.
Key words: Aluminum alloy, kitchen utensils, molding sand, , , ,
|
Abstract
|
PDF
|
HTML |
|
Cite this Reference:
Mamadou Babacar Ndiaye, Sandrine Bec, Bernard Coquillet and Ibrahima Khalil Cissé, . Analysis of Cooking Utensils Containing Aluminium Scrap in Senegal. Research Journal of Applied Sciences, Engineering and Technology, (04): 367-370.
|
|
|
|
![](http://www.maxwellsci.com/images/RJASET-maxw.jpg) |
ISSN (Online): 2040-7467
ISSN (Print): 2040-7459 |
![Submit Manuscript](../images/sub.jpg) |
Information |
|
|
|
Sales & Services |
|
|
|