Abstract
|
Article Information:
Optimization Analysis of Discharged Gas Flow Duct in Gas Laser
Jiang Fan and He Hua
Corresponding Author: Jiang Fan
Submitted: February 16, 2012
Accepted: March 12, 2012
Published: July 01, 2012 |
Abstract:
|
In order to obtain an accurately converged solution in a minimal amount of time, the porous medium
model is used to replace a complicated 3D model to analyze flow field of gas duct, the results show that the
height of discharge region, the expansion angle and the width of discharge region could affect the flow in the
gas duct of CO2 laser with pin-to-plate discharge. As the appropriate selection, the height of discharge region
is 43.5 mm and the expansion angle is 8-10 degree, also, the length of gas duct is slightly larger (20-30 mm)
than the width of the anode plate. The flow of the discharge region and stress on the cathode pin are influenced
by arrangement of cathode pin, it concludes that the clutter arrangement is much better than the regular
arrangement.
Key words: CO2 laser, discharged gas flow duct, numerical simulation, porous medium model, structure optimization, ,
|
Abstract
|
PDF
|
HTML |
|
Cite this Reference:
Jiang Fan and He Hua, . Optimization Analysis of Discharged Gas Flow Duct in Gas Laser. Research Journal of Applied Sciences, Engineering and Technology, (13): 1940-1948.
|
|
|
|
|
ISSN (Online): 2040-7467
ISSN (Print): 2040-7459 |
|
Information |
|
|
|
Sales & Services |
|
|
|