Home            Contact us            FAQs
    
      Journal Home      |      Aim & Scope     |     Author(s) Information      |      Editorial Board      |      MSP Download Statistics

     Research Journal of Applied Sciences, Engineering and Technology

    Abstract
2013(Vol.5, Issue:01)
Article Information:

Effect of Heat up Rate on Thermal Stratification in Horizontal Pipe

Athar Rasool, Sun Zhongning and Wang Jianjun
Corresponding Author:  Athar Rasool 
Submitted: June 28, 2012
Accepted: July 19, 2012
Published: January 01, 2013
Abstract:
The study is performed to analyze the effects of heat up rate on thermal stratification phenomenon in pressurizer surge line. The horizontal section of pressurizer surge line is considered for this study since significant thermal stratification is usually observed in horizontal sections of the pressurizer surge line. The tendency of thermal stratification reduces with increasing flow rates based on which four cases of heat up rates with increasing flow velocities are analyzed. The selected flow velocities of 0.01, 0.05, 0.1 and 0.2 m/sec for the study are calculated from the operating range of dimensionless Froude number 0.02-0.2 of pressurized water reactor type nuclear power plants. The horizontal pipe model inner diameter is 305 mm with thickness of 33.5 mm and length of four diameters. The Richardson number for the four cases is greater than unity and thermal stratification is likely to occur. The transient analysis is performed using commercially available software ANSYS CFX. The transient temperature distribution along the horizontal pipe wall with different heat up rates is represented in this study. Thermal stratification reduces with increase in heat up rate or flow velocity.

Key words:  Pressurizer surge line, reactor heat up rate, RNG K-Eturbulence model, thermel stratification, , ,
Abstract PDF HTML
Cite this Reference:
Athar Rasool, Sun Zhongning and Wang Jianjun, . Effect of Heat up Rate on Thermal Stratification in Horizontal Pipe. Research Journal of Applied Sciences, Engineering and Technology, (01): 332-338.
ISSN (Online):  2040-7467
ISSN (Print):   2040-7459
Submit Manuscript
   Information
   Sales & Services
Home   |  Contact us   |  About us   |  Privacy Policy
Copyright © 2024. MAXWELL Scientific Publication Corp., All rights reserved