Abstract

Machinery-electric-hydraulic coupling vibration seriously affects the control accuracy of the food processing rolling mill. In this study, a remote vibration sensor monitoring method based on network technology is put forward. By using Siemens PLC, the state monitoring device is designed to realize the parameters measurement, such as vibration, current, pressure, force and temperature, etc. Then the parameter information is transferred to the configuration software system through the ethernet interface. The research result shows that the network-based remote sensor monitoring system of machinery-electric-hydraulic coupling vibration plays a key role in ensuring the normal work for food processing rolling mill screw-down system.

Keywords:

References

1. Bin, L., L. Shuang, Z. Yekuan and W. Yan, 2010. Bifurcation control for electromechanical coupling vibration in rolling mill drive system based on nonlinear feedback. J. Mech. Eng., 46: 160-166.
   CrossRef    
2. Brusa, E., L. Lemma and D. Benasciutti, 2010. Vibration analysis of a Sendzimir cold rolling mill and bearing fault detection. P. I. Mech. Eng. C-J. Mec., 224: 1645-1654.
   
3. Dongxiao, H., Z. Yue, L. Haoran, L. Fei and P. Rongrong, 2014. Research on nonlinear vibration characteristics of cold rolling mill based on dynamic rolling force. Shock Vib., 49: 45.
   
4. Haoran, L., H. Dongxiao, S. Peiming and L. Fei, 2011. Vibration characteristics of hysteretic nonlinear vertical vibration system of rolling mill roller. J. Mech. Eng., 47: 65-71.
   CrossRef    
5. Maria, C.V. and P. Susanna, 2013. Analysis of chattering phenomenon in industrial S6-high rolling mill. Diagnostyka, 14(3): 3-8.
   
6. Skripalenko, M.M., D.A. Ashikhmin, M.N. Skripalenko and G.P. Zhigulev, 2011. Technical diagnosis and diagnostic modeling of mechanisms in the main line of a rolling mill. Metallurgist, 54: 744-752.
   CrossRef    
7. Xiao-qiang, Y., W. Xian-feng, Y. Xi-en, W. Suo-tuan and X. Jian-zhong, 2014. Coupling research on torsional vibration and axial vibration of hot strip rolling mill. Eng. Mech., 31: 214.
   
8. Youngdeuk, K., K. Chang-Wan, L. Sung-Jin and P. Hyunchul, 2012a. Experimental and numerical investigation of the vibration characteristics in a cold rolling mill using multibody dynamics. ISIJ Int., 52: 2042-2047.
   CrossRef    
9. Youngdeuk, K., P. Hyunchul, S.L. Seoung and K. Chang-Wan, 2012b. Development of a mathematical model for the prediction of vibration in a cold rolling mill including the driving system. ISIJ Int., 52: 1135-1144.
   CrossRef    

Competing interests

The authors have no competing interests.

Open Access Policy

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Copyright

The authors have no competing interests.