Research Article | OPEN ACCESS
Physico-Chemical Characterization of Brew during the Brewing Corn Malt in the Production of Maize Beer in Congo
1P. Diakabana, 2M. Mvoula-Tsieri, 3J. Dhellot, 4S.C. Kobawila and 4D. Louembe
1General Delegation for Scientific and Technological Research (French), P.O. Box 2499-Brazzaville, Congo
2Rural Development Institute, University Marien (French), Ngouabi, BP 69, Brazzaville, Congo
3National School of Engineering, University Marien (French), Ngouabi, Brazzaville, Congo
4Faculty of Science, University Marien (French), Ngouabi, BP 69, Brazzaville, Congo
Advance Journal of Food Science and Technology 2013 6:671-677
Received: December 17, 2012 | Accepted: January 19, 2013 | Published: June 05, 2013
Abstract
The study consists in the production of a traditional beer from maize in the Congo. The traditional method of brewing corn malt has three main stages: malting corn, brewing corn malt and fermentation. During the brewing corn malt, endogenous amylase activity is destroyed during the stiffening of the starch to about 80°C. A pre-cooking of the mash is necessitated to promote amylolyse at 50°C with an exogenous enzyme. The use of a preparation of α- amylase can liquefy the mash and produce a sweet wort (average density = 12.5° Balling) rich in dextrin corresponding to an apparent extract of 4° Balling in beer. The rising profile of the pH of the corn malt mash, from mashing to extract the wort does not affect the pH of the beer produced. This beer, slightly alcoholic (3.6% ethanol), is characterized by a nomal acid pH (pH = 4.15 on average) and a brown color (25 EBC units). Its slight bitterness (21 EBU) and the fine aroma of a beer closer barley produced industrially in the Congo.
Keywords:
Amylolyse, brewing, corn malt, maize beer, wort,
Competing interests
The authors have no competing interests.
Open Access Policy
This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Copyright
The authors have no competing interests.
|
|
|
ISSN (Online): 2042-4876
ISSN (Print): 2042-4868 |
|
Information |
|
|
|
Sales & Services |
|
|
|