Research Article | OPEN ACCESS
Study on the Rheological Property of Cassava Starch Adhesives
1, 2Junjun Liu, 1Lanzhong Guo, 1Li Yang, 1Zhong Liu and 2Chunxia He
1School of Mechanical Engineering, Changshu Institute of Technology, Changshu, 215500, China
2Key Laboratory of Intelligence Agricultural Equipment, College of Engineering,
Nanjing Agricultural University, Nanjing 210031, China
Advance Journal of Food Science and Technology 2014 3:374-377
Received: October 31, 2013 | Accepted: November 12, 2013 | Published: March 10, 2014
Abstract
The main goal of this study was to use cassava starch in the production of environmentally sound adhesives. 'Three-formaldehyde glue' pollutes the environment and harms to human health strongly, which widely used for wood-based panels preparation. Environment-friendly cassava starch adhesives were prepared using method of oxidation-gelatinization, insteading of the three formaldehyde glue. The effects of the quality ratio of starch and water, temperature and shear rate on the apparent viscosity of the adhesive were studied. The rheological eigenvalue of apparent viscosity was studied through nonlinear regression. The results showed that the apparent viscosity of cassava starch adhesives decreased with the increasing of temperature; the apparent viscosity decreased slowly with the increasing of rotor speed; the phenomenon of shear thinning appeared within cassava starch adhesives which was pseudo-plastic fluids. Cassava starch adhesives with characteristics of non-toxic, no smell and pollution could be applied in interior and upscale packaging.
Keywords:
Apparent viscosity, cassava starch adhesives, rheological eigenvalue,
References
- Chen, Y., S.P. Chen, J.P. You and Z.H. Wu, 2006. Structure and adhesive properties of oxidized cassawa starch. Chin. J. Appl. Chem., 10: 1173-1175.
-
Chen, L., S. Chen, Y. Chen, J. You and Z. Wu, 2007. Preparation of corrugating adhesives by catalytic oxidation of cassawa starch. J. Jilin Inst. Chem. Technol., 1: 28-32.
- Ding, X., 2008. Studies of production process of starch adhesive obtained by H2O2-oxidizing in room temperature. Adhesion China, 3: 26-27.
-
Fu, L.H. and L.X. Lu, 2008. Study on factors affecting viscosity of carboxymethyl oxidation starch. Leather Chem., 1: 5-9.
-
Guo, X. and H. Guo, 2007. Preparation of quick drying oxidized starch adhesive. Packag. Eng., 5: 48-50.
- Li, M., Z. Zhu and Y. Gu, 2007. Study on allyl starch graft PMA sizing agent. Cotton Text. Technol., 12: 12-15.
- Li, H., G. Liu, G. Zhang, B. Hu, D. Yu and S. Chen, 2008. The latest progress in study on starch-based adhesives. Chem. Adhesion, 5: 50-53.
- Lin, X., Z. Zhu and L. Yin, 2007. Effect of etherified starches on the adhesion to wool fibers. Wool Text. J., 7: 45-48.
- Liu, H.J., L. Ramsden and H. Corke, 1999. Physical properties of cross-linked and acetylated normal and waxy rice starch. Starch-Starke, 51(7): 249-252.
CrossRef
- Liu, Y., R. Roger, C. Liu, X. Lin, M. Xie, H. Peng and D. Zheng, 2008. Starch based polyester type water resistant wood adhesive. T. Chin. Soc. Agric. Eng., 9: 309-312.
- Santayanon, R. and J. Wootthikanokkhan, 2003. Modification of cassava starch by using propionic anhydride and properties of the starch-blended polyester polyurethane. Carbohyd. Polym., 51(1): 17-24.
CrossRef
- Shi, J.Y. and S.M. Wang, 2006. Study on modification of API adhesive by corn starch. China Adhesives, 1: 35-37.
-
Shi, J., H. Tu and S. Wang, 2008. Properties of main agent in API adhesive by composite modified corn starch. Sci. Silvae Sin., 8: 100-104.
- Imam, S.H., S.H. Gordon and L. Mao, 2001. Environmentally friendly wood adhesive from a renewable plantpolymer: Characteristics and optimization. Polym. Degrad. Stabil., 73(3): 529-533.
CrossRef
- Wu, X., Z. Hou and C. Kan, 2009. Research progress in chemical modification of starch-based adhesives. Chem. Adhesion, 5: 45-49.
-
Zhang, Y. and L. Zhang, 2008. Study of the influencing factors on the performance of oxidized potato starch adhesives in difference oxidation condition. Packag. Eng., 1: 18-20.
Competing interests
The authors have no competing interests.
Open Access Policy
This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Copyright
The authors have no competing interests.
|
|
|
ISSN (Online): 2042-4876
ISSN (Print): 2042-4868 |
|
Information |
|
|
|
Sales & Services |
|
|
|