Research Article | OPEN ACCESS
Effects of Dry-, Wet- and Freeze-grinding Pretreatment Methods on the Physicochemical Properties of Maitake Mushroom (Grifola frondosa) Superfine Powders
Su-Wen Liu, Shuo Guo, Xiao-Yu Xia and Xue-Dong Chang
Department of Food Science and Technology, Hebei Normal University of Science and Technology, Qinhuangdao, Hebei 066004, China
Advance Journal of Food Science and Technology 2015 9:730-738
Received: September 13, 2014 | Accepted: September 20, 2014 | Published: March 25, 2015
Abstract
The dendritic caps and stipes of maitake mushrooms (Grifola frondosa) were pretreated by dry-, wet-, or freeze-grinding followed by jet milling to produce superfine powders. The effects of the pretreatment grinding conditions on the physicochemical properties of these powders were investigated. Compared to the dry and wet processes, the freeze-grinding pretreatment effectively reduced particle sizes (cap, 6.75 μm; stipe, 5.76 μm) and produced narrow and uniform particle size distributions. For cap or stipe, For the same material (cap or stipe), powders from the freeze-grinding pretreatment exhibited higher values of specific surface area, bulk density, water holding capacity, but worse color values than the dry- and wet-ground powders. For the same grinding pretreatment method, cap powders exhibited higher values for the water solubility index and mobility than stipe powders. For the same environmental humidity, the Halsey model showed the best goodness-of-fit for the moisture sorption isotherms of the superfine powders.
Keywords:
Maitake mushroom (Grifola frondosa), mathematical model, micronization, microstructure, physicochemical properties,
References
-
AOAC (Association of Official Analytical Chemists), 1990. Official Methods of Analysis of the Association of Official Analytical Chemists. 15th Edn., Association of Official Analytical Chemists, Washington, DC.
-
AOAC (Association of Official Analytical Chemists), 1997. Official Methods of Analysis. 16th Edn., 3rd Revision. AOAC International, Washington, DC.
-
Bai, Y.X. and Y.F. Li, 2006. Preparation and characterization of cross-linked porous cellulose beads. Carbohyd. Polym., 64: 402-407.
CrossRef -
Cao, W., Y. Nishiyama and S. Koide, 2003. Thin-layer drying of maitake mushroom analysed with a simplified model. Biosyst. Eng., 85(3): 331-337.
CrossRef -
Chau, C.F., Y.T. Wang and Y.L. Wen, 2007. Different micronization methods significantly improve the functionality of carrot insoluble fibre. Food Chem., 100: 1402-1408.
CrossRef -
Chen, G.T., X.M. Ma, S.T. Liu, Y.L. Liao and G.Q. Zhao, 2012. Isolation, purification and antioxidant activities of polysaccharides from Grifola frondosa. Carbohyd. Polym., 89: 61-66.
CrossRef PMid:24750604 -
Cui, F.J., X.Y. Zan, Y.G. Zhou, Y. Yang, W.J. Sun, D.M. Huang and D. Ying, 2013. Freeze-drying of glycoprotein GFPS1b from Grifola frondosa GF9801: Drying kinetics, functional, conformational and topographical changes. Dry. Technol., 31: 1611-1618.
CrossRef -
Demirkesen, I., G. Sumnu, S. Sahin and N. Uysal, 2011. Optimisation of formulations and infrared-microwave combination baking conditions of chestnut-rice breads. Int. J. Food Sci. Tech., 46: 1809-1815.
CrossRef -
Devi, A.F., K. Fibrianto, P.J. Torley and B. Bhandari 2009. Physical properties of cryomilled rice starch. J. Cereal Sci., 1: 1-7.
CrossRef -
Giry, K., J.M. Péan, L. Giraud, S. Marsas, H. Rolland and P. Wüthrich, 2006. Drug/lactose co-micronization by jet milling to improve aerosolization properties of a powder for inhalation. Int. J. Pharm., 321: 162-166.
CrossRef PMid:16797150 -
Hayakawa, I., Y.I. Yamada and Y. Fujio, 1993. Microparticulation by jet mill grinding of protein powders and effects on hydrophobicity. J. Food Sci., 58(5): 1026-1029.
CrossRef -
Hemery, Y., M. Chaurand, U. Holopainen, A.M. Lampi, P. Lehtinen, V. Piironen, A. Sadoudi and X. Rouau, 2011. Potential of dry fractionation of wheat bran for the development of food ingredients, part I: Influence of ultra-fine grinding. J. Cereal Sci., 53: 1-8.
CrossRef -
Hong, L., W. Wang, Q. Wang, S. Guo and L. Wu, 2013. Antioxidant and immunomodulatory effects of a ß-glucan from fruit body of maitake (Grifola frondosa). Food Agr. Immunol., 24(4): 409-418.
CrossRef -
Lecumberri, E., R. Mateos, M. Izquierdo-Pulido, P. Rupérez, L. Goya and L. Bravo, 2007. Dietary fibre composition, antioxidant capacity and physico-chemical properties of a fibre-rich product from cocoa (Theobroma cacao L.). Food Chem., 104: 948-954.
CrossRef -
Lee, J.H. and J.M. Lee, 2007. Moisture sorption isotherm characteristics of chaga mushroom powder as influenced by particle size. Food Sci. Biotechnol., 16: 154-158.
-
Lee, J.S., H.S. Kim, Y.J. Lee, I.C. Jung, J.H. Bae and J.S. Lee, 2007. Quality characteristics of sponge cakes containing various levels of Grifola frondosa powder. Korean J. Food Sci. Technol., 39(4): 400-405.
-
Mau, J.L., C.N. Chang, S.J. Huang and C.C. Chen, 2004. Antioxidant properties of methanolic extracts from Grifola frondosa, Morchella esculenta and Termitomyces albuminosus mycelia. Food Chem., 87: 111-118.
CrossRef -
Nath, A. and P.K. Chattopadhyay, 2008. Effect of process parameters and soy flour concentration on quality attributes and microstructural changes in ready-to-eat potato-soy snack using high-temperature short time air puffing. LWT-Food Sci. Technol., 41: 707-715.
CrossRef -
Ngamnikom, P. and S. Songsermpong, 2011. The effects of freeze, dry and wet grinding processes on rice flour properties and their energy consumption. J. Food Eng., 104: 632-638.
CrossRef -
Seguchi, M., N. Morimoto, M. Abe and Y. Yoshino, 2001. Effect of maitake (Grifola frondosa) mushroom powder on bread properties. J. Food Sci., 66(2): 261-264.
CrossRef -
Shin, Y.J. and S.C. Lee, 2014. Antioxidant activity and ß-glucan contents of hydrothermal extracts from maitake (Grifola frondosa). Food Sci. Biotechnol., 23(1): 277-282.
CrossRef -
Sosa, N., D.M. Salatori and C. Schebor, 2012. Physico-chemical and mechanical properties of apple disks subjected to osmotic dehydration and different drying methods. Food Bioprocess Tech., 5: 1790-1802.
CrossRef -
Sowbhagya, H.B., B.V. Sathyendra Rao and N. Krishnamurthy, 2008. Evaluation of size reduction and expansion on yield and quality of cumin (Cuminum cyminum) seed oil. J. Food Eng., 84: 595-600.
CrossRef -
Talpur, N.A., B.W. Echard, A.Y. Fan, O. Jaffari, D. Bagchi and H.G. Preuss, 2002. Antihypertensive and metabolic effects of whole maitake mushroom powder and its fractions in two rat strains. Mol. Cell. Biochem., 237: 129-136.
CrossRef PMid:12236580 -
Taser, O.F., E. Altuntas and E. Ozgoz, 2005. Physical properties of Hungarian and common vetch seeds. J. Appl. Sci., 5: 323-326.
CrossRef -
Tsao, Y.W., Y.C. Kuan, J.L. Wang and F. Sheu, 2013. Characterization of a novel maitake (Grifola frondosa) protein that activates natural killer and dendritic cells and enhances antitumor immunity in mice. J. Agr. Food Chem., 61: 9828-9838.
CrossRef PMid:24020458 -
Wu, G.C., M. Zhang, Y.Q. Wang, K.J. Mothibe and W.X. Chen, 2012. Production of silver carp bone powder using superfine grinding technology: Suitable production parameters and its properties. J. Food Eng., 109: 730-735.
CrossRef -
Yanniotis, S. and J. Blahovec, 2009. Model analysis of sorption isotherms. LWT-Food Sci. Technol., 42: 1688-1695.
-
Zhang, Z., H. Song, Z. Peng, Q. Luoa, J. Minga and G. Zhaoa, 2012. Characterization of stipe and cap powders of mushroom (Lentinus edodes) prepared by different grinding methods. J. Food Eng., 109: 406-413.
CrossRef -
Zhao, X.Y., Z.B. Yang, G.S. Gai and Y. Yang, 2009. Effect of superfine grinding on properties of ginger powder. J. Food Eng., 91: 217-222.
CrossRef -
Zhao, X.Y., F.L. Du, Q.J. Zhu, D.L. Qiu, W.J. Yin and Q. Ao, 2010. Effect of superfine pulverization on properties of Astragalus membranaceus powder. Powder Technol., 203: 620-625.
CrossRef
Competing interests
The authors have no competing interests.
Open Access Policy
This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Copyright
The authors have no competing interests.
|
|
|
ISSN (Online): 2042-4876
ISSN (Print): 2042-4868 |
|
Information |
|
|
|
Sales & Services |
|
|
|