Abstract

This study presents a new humanoid robot control structure - Man-Function humanoid robot. The sensing devices worn on the human body, these devices will produce signals of joints’ change when people move. Computer of the control system receiving the signals and processing them, then issue control signals to the servos of the robot at the same time, control the robot’s behavior. For this reason, a control structure of human’s behavior to determine the robot’s behavior formed. The humanoid robot has 17 servos and two pressure sensors, the rotation of these servos’ steering gears lead to the robot’s behavior changes and 12 servos corresponding to the human body sensing devices, other 5 servos used for the stability control of the robot combined with the pressure sensors. Based on this control structure, some pilot tests of the sensing device or servo have been done, the closed-loop position control mode has been chosen and the Kalman filter smoothing optimization method been used, the initial static walking control of the robot been realized.

Keywords:

Control structure, humanoid robot, kalman filter, man-function, static walking,

References

Competing interests

The authors have no competing interests.

Open Access Policy

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Copyright

The authors have no competing interests.