Research Article | OPEN ACCESS
Research on Flat Panel Ultrovilet Lamps
1, 2Jian Li and 1, 2Kun Wang
1Southwestern Institute of Physics, Chengdu 610041, China
2Engineering and Technical College of Chengdu University of Technology, Leshan 614007, China
Research Journal of Applied Sciences, Engineering and Technology 2013 21:5064-5069
Received: October 08, 2012 | Accepted: December 03, 2012 | Published: May 20, 2013
Abstract
Flat panel ultraviolet Lamps were made of ITO glass and bonded aluminum with porous anodic alumina on the surface. The mixture of argon and nitrogen is introduced as the working gas. The UV radiation power density is tested at different optimization conditions. The results show that the lamp with about 20 W/m2 UV radiation can be obtained when the lamp with 3 mm thick glass and 0.7 mm gas gap distance work at 5% nitrogen and 95% argon at 250 torr. The influence factors are investigated and discussed.
Keywords:
Electron temperature, vacuum ultraviolet radition, ultroviolet lamps,
Competing interests
The authors have no competing interests.
Open Access Policy
This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Copyright
The authors have no competing interests.
|
|
 |
ISSN (Online): 2040-7467
ISSN (Print): 2040-7459 |
 |
| Information |
|
|
|
|
| Sales & Services |
|
|
|
|
