Home            Contact us            FAQs
    
      Journal Home      |      Aim & Scope     |     Author(s) Information      |      Editorial Board      |      MSP Download Statistics

     Research Journal of Applied Sciences, Engineering and Technology


A Novel Scheme for Reduction of Torque Ripple in Direct Torque Control of Three Phase Squirrel Cage Induction Motor Using Seven Level Neutral Point Clamped Inverter

1S. Priya, 2M.R. Rashmi and 3A. Suresh
1St. Peter’s University, Chennai, India
2Amrita School of Engineering, Bangalore, India
3S.M.K. Fomra Institute of Technology, Chennai, India
Research Journal of Applied Sciences, Engineering and Technology  2013  5:1769-1773
http://dx.doi.org/10.19026/rjaset.5.4936  |  © The Author(s) 2013
Received: July 31, 2012  |  Accepted: September 08, 2012  |  Published: February 11, 2013

Abstract

Direct torque control of a 3 phase squirrel cage Induction motor though offers a good dynamic response and is free from dynamic coordinate transformation has a major disadvantage of producing rippled torque which degrades the performance of entire drive system. A scheme is proposed in this study which employs seven levels Neutral point clamped inverter which helps in alleviating the torque disturbances. The control scheme for the proposed method is described in this study and the simulation results are reported to demonstrate its effectiveness.

Keywords:

DTC, induction motor, NPC inverter, torque control,


References


Competing interests

The authors have no competing interests.

Open Access Policy

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Copyright

The authors have no competing interests.

ISSN (Online):  2040-7467
ISSN (Print):   2040-7459
Submit Manuscript
   Information
   Sales & Services
Home   |  Contact us   |  About us   |  Privacy Policy
Copyright © 2024. MAXWELL Scientific Publication Corp., All rights reserved