Abstract

In order to solve the high frequency oscillation generated from the video signal of the camera, the study proposes a method to improve the stability of high frequency oscillation of common sensor signal, which means the high frequency oscillation signal generated from the sensor module can increase the phase margin of the unstable signal through PD controller, thus produces a stable video signal and then through the circuit of AGC (Automatic Gain Control), the automatic compensation of the frequency can be achieved and finally the fourth-order low-pass circuit is used to meet the requirement of cutoff frequency of the sensor signal processing and the stability of the signal and the high frequency performance can be ultimately improved.

Keywords:

AGC circuit, high-frequency oscillation, PD controller, phase margin, video signal,

References

Competing interests

The authors have no competing interests.

Open Access Policy

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Copyright

The authors have no competing interests.