Home            Contact us            FAQs
    
      Journal Home      |      Aim & Scope     |     Author(s) Information      |      Editorial Board      |      MSP Download Statistics

     Research Journal of Applied Sciences, Engineering and Technology


Study and Design of LED Lighting Systems

Li Cheng, Chen Jian Xin and Li Nong
Beijing University of Technology, Beijing 100124, China
Research Journal of Applied Sciences, Engineering and Technology  2013  1:89-94
http://dx.doi.org/10.19026/rjaset.6.4039  |  © The Author(s) 2013
Received: October 22, 2012  |  Accepted: December 14, 2012  |  Published: June 05, 2013

Abstract

In this study, the optical characteristics, thermal characteristics, electrical characteristics of the LED device are studied. After analysis of the significance of the optical model, we establish the model of the LED light source using optical simulation software to analyze the impact of modeling four factors and law, based on ray tracing model intensity distribution with the manufacturers. On this basis, we expand the LED secondary optical design, namely, increasing of LDE method to the light level. After comparing different forms of non-imaging optical components, combined with the actual situation, the final choice is the system composed of rotating parabolic reflector with LDE. Besides, the reflected changing the relative position of the body and LDE space lead to the normal light intensity of the entire system appearing two peaks, but their causes are different. In addition, the method of combining theoretical analysis and computer simulations to study the distribution of LDE array illumination is utilized. Formula on the illumination distribution in the LDB array to a plane parallel thereto is deduced, which is verified by computer simulation and agrees well with it. A quantitative study of the factors affecting the road surface illuminance distribution is made on the basis of previous study, combined with the actual road lighting works. These factors are: LDE array form, the number of LED, spacing between LDE, LDE interval between the street lamps. The derived entire road illumination distribution formula and the corresponding curve gives a basic method for the analysis of such practical problems related outcomes for the LDE illumination optical system design and research basis.

Keywords:

Computer simulations, LDE array, optical simulation software, theoretical analysis,


References


Competing interests

The authors have no competing interests.

Open Access Policy

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Copyright

The authors have no competing interests.

ISSN (Online):  2040-7467
ISSN (Print):   2040-7459
Submit Manuscript
   Information
   Sales & Services
Home   |  Contact us   |  About us   |  Privacy Policy
Copyright © 2024. MAXWELL Scientific Publication Corp., All rights reserved