Research Article | OPEN ACCESS
CO2 Minimum Miscibility Pressure Determination of Pure Hydrocarbons in Different Temperatures Using Slimtube Simulations
Zakaria Hamdi and Mariyamni Awang
Department of Petroleum Engineering, Universiti Teknologi PETRONAS, Malaysia
Research Journal of Applied Sciences, Engineering and Technology 2014 15:3159-3163
Received: October 22, 2013 | Accepted: October 31, 2013 | Published: April 19, 2014
Abstract
Slimtube experiments are used as a determination of Minimum Miscibility Pressure (MMP) for different Enhanced Oil Recovery (EOR) techniques. It is the most reliable technique available for MMP determination. Since slimtube experiments are time consuming, simulation of the process is highly beneficial for fast determination of MMP. This article presents a new set of slimtube simulations to obtain MMP of pure hydrocarbons by CO2. Pure hydrocarbons are subjected to CO2 flooding in slimtube simulationsat different temperatures. Pure hydrocarbons MMP cannot be determined by present correlations used in petroleum industry. At the end, CO2 MMP for each pure hydrocarbon up to C8 is obtained in temperatures varying from 15 to 70°C. As liquid CO2 is also used in these simulations, it showed that by using liquid CO2, the dependency of MMP to molecular weight of hydrocarbon will be decreased and usage of liquid CO2 will yield almost same result for all pure hydrocarbons used in this research.
Keywords:
CO2 injection, liquid CO2, MMP, pure hydrocarbons, slimtube simulation,
References
-
Alston, R.B., G.P. Kokolis and C.F. James, 1985. CO2 minimum miscibility pressure: A correlation for impure CO2 streams and live oil systems. Soc. Petrol. Eng. J., 25(2): 268-274.
CrossRef
-
Amao, A.M., S. Siddiqui and H. Menouar, 2012. A new look at the Minimum Miscibility Pressure (MMP) determination from slimtube measurements. Proceeding of the SPE Improved Oil Recovery Symposium. Society of Petroleum Engineers, Tulsa, Oklahoma, USA.
CrossRef
-
Baviere, M., 1980. Basic Concepts in Enhanced Oil Recovery Processes. Elsevier Applied Science, London, New York.
PMid:7451911
-
Christiansen, R.L. and H.K. Haines, 1987. Rapid measurement of minimum miscibility pressure with the rising-bubble apparatus. SPE Reservoir Eng., 2(4): 523-527.
CrossRef
-
Cook, A.B., C.J. Walker and G.B. Spencer, 1969. Realistic K values of C7+ hydrocarbons for calculating oil vaporization during gas cycling at high pressures. J. Petrol. Technol., 21(7): 901-915.
CrossRef
-
Creek, J.L. and J.M. Sheffield, 1993. Phase behavior, fluid properties and displacement characteristics of permian basin reservoir fluid/CO2 systems. SPE Reservoir Eng., 8(1): 34-42.
CrossRef
-
Cronquist, C., 1978. Carbon dioxide dynamic miscibility with light reservoir oils. Proceeding of the US DOE Annual Symposium.
-
Dunyushkin, I.I. and A.Y. Namiot, 1978. Mixing conditions of oil with carbon dioxide. Neft. Khozyaistov, pp: 59-61.
-
Emera, M.K. and H.K. Sarma, 2005. Use of genetic algorithm to predict Minimum Miscibility Pressure (MMP) between flue gases and oil in design of flue gas injection project. Proceeding of the SPE Middle East Oil and Gas Show and Conference. Society of Petroleum Engineers, Kingdom of Bahrain.
-
Emera, M.K. and H.K. Sarma, 2006. A reliable correlation to predict the change in minimum miscibility pressure when CO2 is diluted with other gases. SPE Reserv. Eval. Eng., 9(4): 366-373.
CrossRef
-
Gardner, J.W., F.M. Orr and P.D. Patel, 1981. The effect of phase behavior on CO2-flood displacement efficiency. SPE J. Petrol. Technol., 33(11): 2067-2081.
CrossRef
-
Glass, O., 1985. Generalized minimum miscibility pressure correlation (includes associated papers 15845 and 16287). Soc. Petrol. Eng. J., 25(6): 927-934.
CrossRef
-
Hadlow, R.E., 1992. Update of industry experience with CO2 injection. Proceeding of the SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers Inc., Washington, D.C.
CrossRef PMid:1535524
-
Hamdi, Z. and M. Awang, 2013. Improving oil recovery by cold CO2 injection: A simulation study. Int. J. Petrol. Geosci. Eng., 1(3): 167-177.
-
Harmon, R.A. and R.B. Grigg, 1988. Vapor-density measurement for estimating minimum miscibility pressure (includes associated papers 19118 and 19500). SPE Reservoir Eng., 3(4): 1215-1220.
CrossRef
-
Holm, L.W. and V.A. Josendal, 1974. Mechanisms of oil displacement by carbon dioxide. SPE J. Petrol. Technol., 26(12): 1427-1438.
CrossRef
-
Holm, L.W. and V.A. Josendal, 1982. Effect of oil composition on miscible-type displacement by carbon dioxide. Soc. Petrol. Eng. J., 22(1): 87-98.
CrossRef
-
Metcalfe, R.S., D.D. Fussell and J.L. Shelton, 1973. A multicell equilibrium separation model for the study of multiple contact miscibility in rich-gas drives. Soc. Petrol. Eng. J., 13(3): 147-155.
CrossRef
-
Miller, J.S. and R.A. Jones, 1981. A laboratory study to determine physical characteristics of heavy oil after CO2 saturation. Proceeding of the SPE/DOE Enhanced Oil Recovery Symposium. Tulsa, Oklahoma.
CrossRef
-
Mungan, N., 1981. Carbon dioxide flooding-fundamentals. J. Can. Petrol. Technol., 20(1).
CrossRef
-
Neau, E., L. Avaullée and J.N. Jaubert, 1996. A new algorithm for enhanced oil recovery calculations. Fluid Phase Equilibr., 117(1-2): 265-272.
CrossRef
-
Rao, D.N., 1997. A new technique of vanishing interfacial tension for miscibility determination. Fluid Phase Equilibr., 139(1-2): 311-324.
CrossRef
-
Stalkup Jr., F.I., 1983. Miscible Displacement. In: Henry, L. (Ed.), Doherty Memorial Fund of AIME, Society of Petroleum Engineers of AIME, New York, Dallas.
-
Turek, E.A., R.S. Metcalfe and R.E. Fishback, 1988. Phase behavior of several CO2/ west texas-reservoir-oil systems. SPE Reservoir Eng., 3(2): 505-516.
CrossRef
-
Wang, Y. and F.M. Jr. Orr, 1997. Analytical calculation of minimum miscibility pressure. Fluid Phase Equilibr., 139(1-2): 101-124.
CrossRef
-
Yan, W., M.L. Michelsen and E.H. Stenby, 2012. Calculation of minimum miscibility pressure using fast slimtube simulation. Proceeding of the SPE Improved Oil Recovery Symposium. Society of Petroleum Engineers, Tulsa, Oklahoma, USA.
CrossRef
-
Yellig, W.F. and R.S. Metcalfe, 1980. Determination and prediction of CO2 minimum miscibility pressures (includes associated paper 8876). SPE J. Petrol. Technol., 32(1): 160-168.
CrossRef
-
Yuan, H., R.T. Johns, A.M. Egwuenu and B. Dindoruk, 2005. Improved MMP correlations for CO2 floods using analytical gasflooding theory. SPE Reserv. Eval. Eng., 8(5): 418-425.
CrossRef
Competing interests
The authors have no competing interests.
Open Access Policy
This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Copyright
The authors have no competing interests.
|
|
![](http://www.maxwellsci.com/images/RJASET-maxw.jpg) |
ISSN (Online): 2040-7467
ISSN (Print): 2040-7459 |
![Submit Manuscript](../images/sub.jpg) |
Information |
|
|
|
Sales & Services |
|
|
|