Research Article | OPEN ACCESS
Mechanical Characteristic of Pervious Concrete Considering the Gradation and Size of Coarse Aggregates
1Alireza Joshaghani, 2Ali Akbar Ramezanianpour and 3Mohammad Jaberizadeh
1Department of Construction Management of Civil Engineering, Amirkabir University of Technology
2Department of Civil Engineering, Concrete Technology and Durability Research Center, Tehran
3Department of Civil Engineering, University of Kurdistan, Sanandaj, Iran
Research Journal of Environmental and Earth Sciences 2014 8:437-442
Received: May 31, 2014 | Accepted: June 20, 2014 | Published: September 20, 2014
Abstract
Pervious concrete is a kind of sustainable pavement with high permeability which is becoming more common as a storm water management. The purpose of this study was to investigate the effects of coarse aggregate on physical and mechanical properties of the pervious concrete such as density, strength, porosity and permeability at 7, 28, 56 days. This experimental investigation conducted by comparing nine different mixtures. Taguchi design of experiments used to optimize the performance of these characteristics. To test the influence of aggregate systematically, water to cement ratio (w/c), paste content and coarse aggregate size were kept constant at 3 levels. 9.5, 12.5 and 19.0 mm were used for maximum aggregate sizes. The relationship between strength and porosity for pervious concrete are found to be dependent on coarse aggregate size. The test results demonstrated when the maximum size of the coarse aggregate increased, the strength decreases and the permeability and porosity grows up. An increased aggregate amount resulted in a significant decrease in compressive strength due to the subsequent decrease in paste amount. Age and coarse aggregate size had effect on the pervious concrete characteristic. To meet the specification requirements in the mix design of pervious concrete, considering both compressive strength and permeability is necessary. Finally, a parametric study is conducted to investigate the influence of design factors on the properties of porous concrete. The general equations for pervious concrete are related to compressive strength and void ratio for different aggregate sizes.
Keywords:
Coarse aggregate, mix design, permeability, pervious concrete, porosity, strength,
Competing interests
The authors have no competing interests.
Open Access Policy
This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Copyright
The authors have no competing interests.
|
|
|
ISSN (Online): 2041-0492
ISSN (Print): 2041-0484 |
|
Information |
|
|
|
Sales & Services |
|
|
|