Research Article | OPEN ACCESS
Dynamic Characteristics of CUK Converter based on Sliding Mode Control
1R. Sriranjani, 2D. Nalini and 1S. Jayalalitha
1School of EEE, SASTRA University, Thanjavur
2EEE Department, Mookambigai College of Engg, Pudukkotai
Research Journal of Applied Sciences, Engineering and Technology 2013 22:5148-5153
Received: July 21, 2012 | Accepted: September 08, 2012 | Published: May 25, 2013
Abstract
In this study the output voltage is controlled by the Cuk converter using Sliding Mode Control. Here to highlight the advantages of SMC, the PI controller is used in Cuk converter to control the output voltage and it is compared with the SMC. The PI and SMC is implemented in the DC-DC converter and the study is carried in MATLAB SIMULINK. The effect of SMC on the DC-DC converter response in steady state, under line variations, load variations and different component variations will be compared with that of PI controller and results are presented.
Keywords:
Cuk converter, MATLAB SIMULINK, PI controller, sliding mode control,
Competing interests
The authors have no competing interests.
Open Access Policy
This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Copyright
The authors have no competing interests.
|
|
![](http://www.maxwellsci.com/images/RJASET-maxw.jpg) |
ISSN (Online): 2040-7467
ISSN (Print): 2040-7459 |
![Submit Manuscript](../images/sub.jpg) |
Information |
|
|
|
Sales & Services |
|
|
|