Abstract

Cold-formed steel members usually display local-global buckling interaction which strongly effects the structural strength of columns. Through strengthening web of the members this buckling can be controlled to some extent. In this investigation, Carbon Fibre Reinforced Polymers (CFRP) is used for strengthening cold formed steel channel member. This paper presents compression tests of cold-formed plain and CFRP strengthened steel channel section columns. This paper also proposes a design method based on Direct Strength Method provisions specified in American Iron and Steel Institute (AISI), for determining the axial compression strength. Results obtained from the proposed design method are compared with experimental test data and are found to be in good agreement.

Keywords:

Axial compression, CFRP, CFRP strengthened, cold formed steel, design methods,

References

Competing interests

The authors have no competing interests.

Open Access Policy

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Copyright

The authors have no competing interests.